76+ Easythreed X1 Thingiverse

76+ Easythreed X1 Thingiverse. Recommended infill over than 98% and layer less than 0.2mm. Perhaps this will work for you. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.

Uitgelicht Fan Duct Easythreed X1 Upgrade Youtube

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Print 1 at a time and use binder clips to hold the mag bed down. This is an attachment to add a 40mm fan to the easythreed x1/x2. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Perhaps this will work for you.

A sort of standalone mod if you will.

Print 1 at a time and use binder clips to hold the mag bed down. A sort of standalone mod if you will. This is an attachment to add a 40mm fan to the easythreed x1/x2. Recommended infill over than 98% and layer less than 0.2mm. Any damage that results from you printing/using this object is solely your responsibility.

Do so at your own discretion... Download files and build them with your 3d printer, laser cutter, or cnc. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. I do not advise printing both at once. I made this by cobbling several designs together and. Perhaps this will work for you.. Perhaps this will work for you.

I made this by cobbling several designs together and. Thingiverse is a universe of things. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. A sort of standalone mod if you will. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Perhaps this will work for you. Download files and build them with your 3d printer, laser cutter, or cnc. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Download files and build them with your 3d printer, laser cutter, or cnc. Technically both parts fit on the print bed. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. A sort of standalone mod if you will. Thingiverse is a universe of things. Some issues i had with it are as follows: Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Some issues i had with it are as follows: Technically both parts fit on the print bed. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. A sort of standalone mod if you will. This is an attachment to add a 40mm fan to the easythreed x1/x2. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

Any damage that results from you printing/using this object is solely your responsibility. Any damage that results from you printing/using this object is solely your responsibility. This is an attachment to add a 40mm fan to the easythreed x1/x2. I made this by cobbling several designs together and. Perhaps this will work for you. Thingiverse is a universe of things. The foot add on is for matching the height of printer to match nema motor. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to... I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Recommended infill over than 98% and layer less than 0.2mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. A sort of standalone mod if you will. Print 1 at a time and use binder clips to hold the mag bed down. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Technically both parts fit on the print bed. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Do so at your own discretion. Any damage that results from you printing/using this object is solely your responsibility.

Download files and build them with your 3d printer, laser cutter, or cnc. Any damage that results from you printing/using this object is solely your responsibility. The foot add on is for matching the height of printer to match nema motor. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I do not advise printing both at once... Recommended infill over than 98% and layer less than 0.2mm.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I made this by cobbling several designs together and. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.

Download files and build them with your 3d printer, laser cutter, or cnc.. I do not advise printing both at once. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Some issues i had with it are as follows: I made this by cobbling several designs together and. Recommended infill over than 98% and layer less than 0.2mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. Do so at your own discretion.

Recommended infill over than 98% and layer less than 0.2mm... I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Do so at your own discretion.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Recommended infill over than 98% and layer less than 0.2mm. Thingiverse is a universe of things. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. A sort of standalone mod if you will. Any damage that results from you printing/using this object is solely your responsibility. Some issues i had with it are as follows: I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.

Any damage that results from you printing/using this object is solely your responsibility.. Recommended infill over than 98% and layer less than 0.2mm. Download files and build them with your 3d printer, laser cutter, or cnc. A sort of standalone mod if you will. Print 1 at a time and use binder clips to hold the mag bed down. Technically both parts fit on the print bed. Some issues i had with it are as follows: Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.

I do not advise printing both at once. Technically both parts fit on the print bed. I made this by cobbling several designs together and. The foot add on is for matching the height of printer to match nema motor.. This is an attachment to add a 40mm fan to the easythreed x1/x2.

Do so at your own discretion.. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Any damage that results from you printing/using this object is solely your responsibility. Recommended infill over than 98% and layer less than 0.2mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. Download files and build them with your 3d printer, laser cutter, or cnc. Do so at your own discretion.. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

A sort of standalone mod if you will. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Recommended infill over than 98% and layer less than 0.2mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! A sort of standalone mod if you will. Recommended infill over than 98% and layer less than 0.2mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Perhaps this will work for you. Any damage that results from you printing/using this object is solely your responsibility. This is an attachment to add a 40mm fan to the easythreed x1/x2... Do so at your own discretion.

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

A sort of standalone mod if you will... I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.. Any damage that results from you printing/using this object is solely your responsibility.

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. This is an attachment to add a 40mm fan to the easythreed x1/x2. I made this by cobbling several designs together and. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Recommended infill over than 98% and layer less than 0.2mm. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

Any damage that results from you printing/using this object is solely your responsibility... Print 1 at a time and use binder clips to hold the mag bed down. Perhaps this will work for you. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Download files and build them with your 3d printer, laser cutter, or cnc... I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

This is an attachment to add a 40mm fan to the easythreed x1/x2. Print 1 at a time and use binder clips to hold the mag bed down. Recommended infill over than 98% and layer less than 0.2mm. Some issues i had with it are as follows: I do not advise printing both at once. This is an attachment to add a 40mm fan to the easythreed x1/x2. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Do so at your own discretion. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. Print 1 at a time and use binder clips to hold the mag bed down. The foot add on is for matching the height of printer to match nema motor.. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Some issues i had with it are as follows: A sort of standalone mod if you will. Download files and build them with your 3d printer, laser cutter, or cnc. Technically both parts fit on the print bed. Print 1 at a time and use binder clips to hold the mag bed down. I made this by cobbling several designs together and... Print 1 at a time and use binder clips to hold the mag bed down.

Thingiverse is a universe of things. Some issues i had with it are as follows:. This is an attachment to add a 40mm fan to the easythreed x1/x2.

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … The foot add on is for matching the height of printer to match nema motor.. Some issues i had with it are as follows:

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I do not advise printing both at once. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Perhaps this will work for you. I made this by cobbling several designs together and. Print 1 at a time and use binder clips to hold the mag bed down. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Recommended infill over than 98% and layer less than 0.2mm. Some issues i had with it are as follows: Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.. A sort of standalone mod if you will.

Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Any damage that results from you printing/using this object is solely your responsibility. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Print 1 at a time and use binder clips to hold the mag bed down. The foot add on is for matching the height of printer to match nema motor. Thingiverse is a universe of things. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I made this by cobbling several designs together and. Recommended infill over than 98% and layer less than 0.2mm.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!.. Technically both parts fit on the print bed. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Any damage that results from you printing/using this object is solely your responsibility. Thingiverse is a universe of things. Some issues i had with it are as follows: I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I do not advise printing both at once. Recommended infill over than 98% and layer less than 0.2mm... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Any damage that results from you printing/using this object is solely your responsibility. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Technically both parts fit on the print bed. The foot add on is for matching the height of printer to match nema motor. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Recommended infill over than 98% and layer less than 0.2mm. Download files and build them with your 3d printer, laser cutter, or cnc. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Some issues i had with it are as follows:. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.

Do so at your own discretion. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. This is an attachment to add a 40mm fan to the easythreed x1/x2. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Any damage that results from you printing/using this object is solely your responsibility. I do not advise printing both at once. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! The foot add on is for matching the height of printer to match nema motor. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

A sort of standalone mod if you will.. Do so at your own discretion. Thingiverse is a universe of things. Any damage that results from you printing/using this object is solely your responsibility. The foot add on is for matching the height of printer to match nema motor. I do not advise printing both at once. This is an attachment to add a 40mm fan to the easythreed x1/x2. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. I made this by cobbling several designs together and. Thingiverse is a universe of things.

The foot add on is for matching the height of printer to match nema motor. Some issues i had with it are as follows: Recommended infill over than 98% and layer less than 0.2mm. The foot add on is for matching the height of printer to match nema motor. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. The foot add on is for matching the height of printer to match nema motor.

Do so at your own discretion. Technically both parts fit on the print bed. Recommended infill over than 98% and layer less than 0.2mm... Perhaps this will work for you.

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Download files and build them with your 3d printer, laser cutter, or cnc. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Some issues i had with it are as follows: Any damage that results from you printing/using this object is solely your responsibility. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.

Some issues i had with it are as follows: Print 1 at a time and use binder clips to hold the mag bed down. This is an attachment to add a 40mm fan to the easythreed x1/x2. Thingiverse is a universe of things. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. The foot add on is for matching the height of printer to match nema motor. Perhaps this will work for you. I do not advise printing both at once. A sort of standalone mod if you will. Download files and build them with your 3d printer, laser cutter, or cnc... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

Download files and build them with your 3d printer, laser cutter, or cnc. I made this by cobbling several designs together and. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Print 1 at a time and use binder clips to hold the mag bed down. Perhaps this will work for you. This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will.. This is an attachment to add a 40mm fan to the easythreed x1/x2.

I do not advise printing both at once.. . I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Some issues i had with it are as follows: Do so at your own discretion. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! A sort of standalone mod if you will. Print 1 at a time and use binder clips to hold the mag bed down. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Download files and build them with your 3d printer, laser cutter, or cnc... I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

Recommended infill over than 98% and layer less than 0.2mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Some issues i had with it are as follows: I do not advise printing both at once.. Thingiverse is a universe of things.

Some issues i had with it are as follows: Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.. Recommended infill over than 98% and layer less than 0.2mm.

I made this by cobbling several designs together and. This is an attachment to add a 40mm fan to the easythreed x1/x2. The foot add on is for matching the height of printer to match nema motor. Perhaps this will work for you.

Print 1 at a time and use binder clips to hold the mag bed down... I do not advise printing both at once. Any damage that results from you printing/using this object is solely your responsibility... Print 1 at a time and use binder clips to hold the mag bed down.

Print 1 at a time and use binder clips to hold the mag bed down. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Download files and build them with your 3d printer, laser cutter, or cnc. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

A sort of standalone mod if you will. The foot add on is for matching the height of printer to match nema motor. A sort of standalone mod if you will. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.

Any damage that results from you printing/using this object is solely your responsibility.. Technically both parts fit on the print bed. A sort of standalone mod if you will. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. Any damage that results from you printing/using this object is solely your responsibility.

I made this by cobbling several designs together and... Recommended infill over than 98% and layer less than 0.2mm. Technically both parts fit on the print bed.

Technically both parts fit on the print bed... The foot add on is for matching the height of printer to match nema motor. Do so at your own discretion. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Print 1 at a time and use binder clips to hold the mag bed down. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

I made this by cobbling several designs together and. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Some issues i had with it are as follows: Recommended infill over than 98% and layer less than 0.2mm. Perhaps this will work for you. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Download files and build them with your 3d printer, laser cutter, or cnc. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

Technically both parts fit on the print bed. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Do so at your own discretion. A sort of standalone mod if you will. I made this by cobbling several designs together and.

Recommended infill over than 98% and layer less than 0.2mm. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Do so at your own discretion. Print 1 at a time and use binder clips to hold the mag bed down. Download files and build them with your 3d printer, laser cutter, or cnc. This is an attachment to add a 40mm fan to the easythreed x1/x2.

I made this by cobbling several designs together and. Recommended infill over than 98% and layer less than 0.2mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Technically both parts fit on the print bed. I do not advise printing both at once. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Perhaps this will work for you. Some issues i had with it are as follows:. I made this by cobbling several designs together and.

Thingiverse is a universe of things. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I made this by cobbling several designs together and. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Thingiverse is a universe of things. I do not advise printing both at once. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. This is an attachment to add a 40mm fan to the easythreed x1/x2.. Technically both parts fit on the print bed.

I do not advise printing both at once. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I do not advise printing both at once. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Download files and build them with your 3d printer, laser cutter, or cnc... Thingiverse is a universe of things.

Download files and build them with your 3d printer, laser cutter, or cnc... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. The foot add on is for matching the height of printer to match nema motor. Do so at your own discretion. This is an attachment to add a 40mm fan to the easythreed x1/x2. Perhaps this will work for you. Any damage that results from you printing/using this object is solely your responsibility. Some issues i had with it are as follows: I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Perhaps this will work for you... I do not advise printing both at once. Thingiverse is a universe of things.. I made this by cobbling several designs together and.

Technically both parts fit on the print bed.. Perhaps this will work for you. I made this by cobbling several designs together and. The foot add on is for matching the height of printer to match nema motor. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. A sort of standalone mod if you will. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

I made this by cobbling several designs together and. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Do so at your own discretion. The foot add on is for matching the height of printer to match nema motor. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Perhaps this will work for you. Technically both parts fit on the print bed. Recommended infill over than 98% and layer less than 0.2mm. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I do not advise printing both at once. The foot add on is for matching the height of printer to match nema motor.

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Thingiverse is a universe of things. A sort of standalone mod if you will. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I made this by cobbling several designs together and. Download files and build them with your 3d printer, laser cutter, or cnc. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Perhaps this will work for you.

Some issues i had with it are as follows:.. Do so at your own discretion. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed. Print 1 at a time and use binder clips to hold the mag bed down. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Perhaps this will work for you. A sort of standalone mod if you will.. Technically both parts fit on the print bed.

Technically both parts fit on the print bed... Do so at your own discretion. This is an attachment to add a 40mm fan to the easythreed x1/x2. I do not advise printing both at once. Perhaps this will work for you. A sort of standalone mod if you will. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Any damage that results from you printing/using this object is solely your responsibility. Some issues i had with it are as follows:.. Thingiverse is a universe of things.

Download files and build them with your 3d printer, laser cutter, or cnc.. Some issues i had with it are as follows: The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Download files and build them with your 3d printer, laser cutter, or cnc. Technically both parts fit on the print bed. This is an attachment to add a 40mm fan to the easythreed x1/x2... Technically both parts fit on the print bed.

This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will. Technically both parts fit on the print bed. Perhaps this will work for you.. Recommended infill over than 98% and layer less than 0.2mm.

Do so at your own discretion. Technically both parts fit on the print bed.. Do so at your own discretion.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Do so at your own discretion. Thingiverse is a universe of things. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Print 1 at a time and use binder clips to hold the mag bed down. I made this by cobbling several designs together and. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company... I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. Any damage that results from you printing/using this object is solely your responsibility. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. A sort of standalone mod if you will. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed.

Download files and build them with your 3d printer, laser cutter, or cnc. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I made this by cobbling several designs together and. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

Perhaps this will work for you. Perhaps this will work for you. Technically both parts fit on the print bed. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. A sort of standalone mod if you will.. Print 1 at a time and use binder clips to hold the mag bed down.

Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. Print 1 at a time and use binder clips to hold the mag bed down.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Download files and build them with your 3d printer, laser cutter, or cnc. Technically both parts fit on the print bed. Do so at your own discretion.. A sort of standalone mod if you will.

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted... Do so at your own discretion. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Perhaps this will work for you. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I do not advise printing both at once. Some issues i had with it are as follows: Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! The foot add on is for matching the height of printer to match nema motor.

Thingiverse is a universe of things. A sort of standalone mod if you will.

Perhaps this will work for you... The foot add on is for matching the height of printer to match nema motor. Thingiverse is a universe of things. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Technically both parts fit on the print bed. Any damage that results from you printing/using this object is solely your responsibility. Download files and build them with your 3d printer, laser cutter, or cnc.. Perhaps this will work for you.

Print 1 at a time and use binder clips to hold the mag bed down... Recommended infill over than 98% and layer less than 0.2mm. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I do not advise printing both at once. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. A sort of standalone mod if you will. Any damage that results from you printing/using this object is solely your responsibility... Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

Technically both parts fit on the print bed. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. This is an attachment to add a 40mm fan to the easythreed x1/x2. Print 1 at a time and use binder clips to hold the mag bed down.

Some issues i had with it are as follows: Technically both parts fit on the print bed. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. A sort of standalone mod if you will. Thingiverse is a universe of things. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Recommended infill over than 98% and layer less than 0.2mm.. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.